You want your kitchen to look new, but you don’t want a huge bill. Refacing your cabinets could be the answer. The trouble starts when you search for the price. One site says a couple thousand dollars. Another says ten thousand. So what does it really cost in Dallas?
We pulled together published cost data from Angi, HomeAdvisor, and a Dallas cost guide. Then we averaged it out and broke it down in plain words. You will see the average price, what changes it, what hidden costs to watch for, and how to read a quote without getting fooled.
Quick answer
- Average cost in Dallas: about $6,450 for a typical kitchen
- Common range: about $3,150 to $9,600
- Per door: about $120 to $160
- Per linear foot: about $130 to $300
- Time: usually 3 to 5 days for a standard kitchen
These are market ranges, not a quote for your kitchen. Your real price depends on size, material, and the shape your cabinet boxes are in. Want a firm number? Get a free estimate.
How Much Does Kitchen Cabinet Refacing Cost in Dallas?
For a typical Dallas kitchen, most homeowners pay somewhere between $3,150 and $9,600. The average lands near $6,450.
Here is where those numbers come from. Angi reports a Dallas range of $3,508 to $9,964, with an average near $6,700. HomeAdvisor’s Dallas data shows a typical range of $2,800 to $9,300, with an average near $6,200. We averaged the low ends, the high ends, and the middle numbers to get one clear picture.
How does that compare with the rest of the country? HomeAdvisor puts the national average near $7,230. So Dallas tends to run a little lower. Angi says the gap is about 19%. It points to lower labor and material costs in Texas as part of the reason.
Here is the simple version:
| Way of pricing | Typical Dallas range |
|---|---|
| Whole kitchen | $3,150 to $9,600 |
| Average whole kitchen | About $6,450 |
| Per door | $120 to $160 |
| Per linear foot | $130 to $300 |
Why the Prices You See Online Don’t Match
If you have looked around, you have probably felt confused. Here is why.
Sites use different units. Some price by the door. Some price by the linear foot, which is the length of your cabinet run. Some give a total for the whole kitchen. These three numbers can look far apart even when they describe the same job.
Sites include different things. A low price may cover only basic doors and drawer fronts. A higher price may include veneer on the boxes, new hinges, new pulls, and repairs. If one number counts more work than another, it will cost more.
Sites pull from different data. Some use surveys of real homeowners. Others use feedback from contractors. Others just give a rough guess. That is why we blended several sources instead of trusting just one.
Kitchens are not the same. A small galley kitchen and a big open kitchen with an island are two very different jobs.
One more thing to watch. A few low numbers online sit in tables on pages about something else, like cabinet installation, with no source behind them. We left those out. If a number has no clear source, treat it with care.
Kitchen Cabinet Refacing Cost by Kitchen Size
Bigger kitchens cost more because they need more doors, more drawer fronts, and more time. Angi’s Dallas data breaks it down by linear feet of cabinets:
| Kitchen size | Linear feet | Typical cost |
|---|---|---|
| Small | About 10 | $1,225 to $2,425 |
| Medium | About 20 | $2,425 to $4,850 |
| Large | 30 or more | $4,050 to $8,100 |
You can also look at it by the number of doors. A Dallas cost guide from HomeBlue shows:
| Number of doors | Typical cost |
|---|---|
| 15 | $1,780 to $2,460 |
| 20 | $2,370 to $3,280 |
| 30 | $3,560 to $4,930 |
| 40 | $4,740 to $6,570 |
Notice that these size-based numbers run lower than the full-kitchen range above. That is normal. Size-based prices tend to show the base job. Real projects often add drawer fronts, hardware, repairs, and upgrades, and those push the total up toward the middle and top of the range.
Not sure how many linear feet you have? Measure along the wall where the base cabinets sit, then do the same for the upper cabinets. Add them up. Close is good enough for a first guess.
Cost by Material
The material you pick changes your price more than almost anything else. Here are the common choices, with Angi’s price per linear foot:
| Material | What it is | Cost per linear foot |
|---|---|---|
| Laminate | Tough, easy-to-clean surface | $40 to $100 |
| Thermofoil | Vinyl film over a smooth board | $50 to $100 |
| Wood veneer | Thin layer of real wood | $90 to $200 |
| Solid wood or plywood | Classic and very durable | $150 to $400 |
HomeAdvisor lists prices per square foot instead. It shows about $80 to $125 for thermofoil, $100 to $250 for wood veneer, and $200 to $500 for solid wood and plywood. The order stays the same either way. Laminate and thermofoil cost the least. Solid wood costs the most.
A note for Dallas homes. Summers here are hot and humid, so material choice matters more than you might think. Thermofoil is a vinyl film, and heat is its weak spot. If your cabinets sit next to the oven, near a dishwasher vent, or under a sunny window, it can start to lift over time. Wood and well-built painted doors handle heat better, though wood can swell a little in humid air. A good installer will talk through these tradeoffs with you before you choose.
What Else Changes the Price?
Material and size set the base. These things move it up or down:
Hardware. New pulls and knobs often cost about $3 to $15 each. Soft-close hinges can add roughly $100 to $250 for a kitchen. If you love your current hardware and it is in good shape, reuse it and save.
Lighting and trim. Under-cabinet lights run about $200 to $300 per light. Crown molding can add $700 to $2,100. These are nice touches, but they add up fast.
Tight spaces. A cramped kitchen or a layout with many corners slows the crew down. More time means more labor.
Door style. Simple flat doors usually cost less than detailed styles with extra profiles.
Custom colors and finishes. A special color or a high-end finish costs more than a standard one.
Cabinet condition. Boxes in good shape are quick to prepare. Boxes that need repair take extra time and money.
Labor. Angi puts labor at about $100 to $300 per linear foot for resurfacing work. Texas labor tends to be lower than in many other states.
Hidden Costs to Watch For
A fair quote should not hold surprises. Still, these are the ones that catch people off guard:
- Repairs found after the old doors come off. Water damage under the sink is a common one.
- Finishing the side panels and frames. These parts must match the new doors.
- Hardware that doesn’t fit. New hinges and pulls may be needed if old holes don’t line up.
- Countertop issues. Most refacing jobs don’t require removing countertops. But if the overhang blocks access to the boxes, the crew may need to lift it for a short time. Ask about this up front.
- Add-ons you didn’t plan for. Lights, trim, and soft-close parts can quietly raise the total.
Good news on permits: Angi notes that refacing usually doesn’t need a permit budget. Ask your contractor to confirm for your home.
What Should Be in Your Quote
Ask for a written, itemized quote. Then check that it spells out:
- The number of doors and drawer fronts being replaced
- The material and finish for each part
- What is happening to the cabinet boxes (veneer, paint, or other)
- New hinges, pulls, and any soft-close parts
- Repairs that are included, and a price for repairs that might come up
- The start date and the expected finish date
- The payment schedule
- Warranty details
- What is not included
When you compare quotes, compare the same list of work. A lower price that leaves things out is not really lower.
Refacing vs Refinishing vs Replacing: Cost and Lifespan
Refacing is not your only option. Here is how it stacks up:
| Option | What happens | Typical cost | How long it lasts |
|---|---|---|---|
| Painting | New paint on existing doors and boxes | $150 to $2,600 | Shorter |
| Refinishing | Sand and apply new stain or finish | $1,625 to $5,675 | About 10 to 15 years (pro job) |
| Refacing | New doors and drawer fronts, new surface on boxes | $3,250 to $10,925 | About 15 to 20 years |
| Replacing | All-new cabinets, boxes included | Often $10,000 or more | About 25 to 30 years |
The price ranges come from Angi and HomeAdvisor. The lifespans come from RealCostIQ’s comparison.
HomeAdvisor says refacing often costs about 30% to 50% less than replacing. Keep in mind that the savings are biggest when you also keep your countertops, floors, and backsplash. If you replace the cabinets, you may end up replacing some of those too.
Also remember what refacing cannot do. It keeps your existing boxes in place. You can’t move the sink, add an island, or gain more storage. If you want a new layout, replacement is the right call. If you’re still deciding, read our guide on cabinet refacing vs replacement.
How Long Does Refacing Take?
Most professional crews finish a standard kitchen in about 3 to 5 days. A large kitchen or an intricate door style can add a day or two.
Replacement takes much longer. Old cabinets come out, new ones must be ordered and delivered, and installation follows. That can mean several weeks without a normal kitchen.
Timing in Dallas. Angi notes that hot, humid summers can make resurfacing work harder, since heat and moisture affect finishes. It also says the busiest times for local pros are late fall and early spring. If you want a smooth schedule, book ahead and ask when your crew can start.
Is Refacing Worth It? What About Resale Value?
For many homeowners, yes. You get a fresh kitchen without paying for new boxes or demolition.
On resale, the sources give different numbers. HomeAdvisor estimates refacing returns about 65% to 80% of what you spend. Angi, citing the National Association of Realtors, says kitchen updates like this return around 60%. So expect a good return, but not a full one. Think of it as getting a kitchen you enjoy now, with a solid boost when you sell.
Refacing makes the most sense when your boxes are strong, you like your layout, and you want a big visual change for less money. If the boxes are damaged, new doors won’t fix the real problem.
DIY or Hire a Pro?
DIY refacing materials can run about $1,645 to $6,570, according to HomeAdvisor. That sounds like a nice saving. But refacing takes careful measuring, steady hands, and the right tools. Small mistakes show up as crooked doors, uneven edges, or peeling surfaces. Fixing them can cost more than hiring a pro in the first place.
A safety note. If your home was built before 1978, the old paint may contain lead. Before you sand or strip anything, have it tested. This is one more reason to leave the prep work to someone trained for it.
A Recent Dallas-Area Project
Kitchen cabinet refacing in Plano, TX
This kitchen had solid oak cabinets with a dated honey finish and arched doors. The boxes were sound and the layout worked well, so refacing was the right fit. We installed new white Shaker-style doors and drawer fronts, finished the frames to match, and added black pulls. The project took [X days]. The final cost was in the [$X to $X] range.
Seeing a before-and-after helps you picture what’s possible in your own kitchen. If you’d like to talk through a similar project, we’re happy to help.
Questions to Ask Before You Hire
A good contractor will answer these without hesitation:
- Can I see photos of similar kitchens you’ve completed?
- Is your quote itemized and in writing?
- What happens if you find damage after the old doors come off?
- Do you carry insurance, and can I see proof?
- What warranty do you offer on the work?
- Who will actually be in my home each day?
- How do you protect my floors and keep dust down?
- How will the finish hold up in Dallas heat and humidity?
If an answer feels vague, keep looking.
How to Save Money Without Cutting Corners
- Keep hardware you like. Clean it up and reinstall it.
- Pick a simple door style. Flat or basic Shaker doors cost less than detailed ones.
- Choose a mid-range material. Laminate or thermofoil costs less than solid wood. Just check that it suits your kitchen’s heat and moisture.
- Skip the extras for now. You can add lighting or crown molding later.
- Fix problems early. A small leak caught today is cheaper than damaged boxes next year.
- Get two or three itemized quotes. Compare the same scope of work.
Frequently Asked Questions
How much does kitchen cabinet refacing cost in Dallas?
Most Dallas kitchens fall between about $3,150 and $9,600, with an average near $6,450. Your price depends on size, material, and the shape of your cabinet boxes.
What is the cost per door for cabinet refacing in Dallas?
A Dallas cost guide shows about $120 to $160 per door. This usually reflects a basic job. Extras and repairs raise it.
What is the cost per linear foot?
Expect about $130 to $300 per linear foot in Dallas, depending on material and finish.
Is refacing cheaper than replacing cabinets?
Usually, yes. HomeAdvisor says refacing often costs 30% to 50% less. The savings grow when you keep your countertops and floors.
How long does cabinet refacing take?
About 3 to 5 days for a standard kitchen. Large kitchens may need a day or two more.
Do I need a permit?
Angi notes refacing usually doesn’t need a permit budget. Confirm with your contractor for your home.
Will my countertops need to come off?
Usually not. In some cases the crew may lift them briefly if the overhang blocks access. Ask about it during your estimate.
Is cabinet refacing worth it?
It is a good choice when your boxes are in good shape and you like your layout. Expect to recover roughly 60% to 80% of the cost when you sell, based on the sources above.
Can I reface cabinets that have water damage?
Not safely. Water-damaged or swollen boxes should be replaced, since new doors only cover up the problem.
Get a Free Estimate for Your Dallas Kitchen
Numbers on a page can only take you so far. The best way to know your real cost is to have someone look at your cabinets in person.
At Bela Construction, we’ll check your boxes, measure your kitchen, and give you an honest answer. If refacing is the smart move, we’ll tell you why. If replacement makes more sense, we’ll say that too. We serve homeowners across the Dallas area. [Add your warranty and insurance line here.]
Get Your Free Estimate or call us at +1 214-662-6647.
Pingback: Cabinet Refacing vs Replacement in Dallas: Which One Is Right for Your Kitchen?